6
Battery Cover
4 AA Batteries
(NOT INCLUDED)
First, remove the screw on the battery cover and then
remove the battery cover itself. Next, install 4 AA
batteries with the correct polarity. Finally, replace the
battery cover and screw it in place.
Make sure the drone power switch is in the
OFF position. Pull the battery compartment
door away from the drone and swing it open.
Close the battery compartment and switch on
the drone power switch when ready to fly.
Put the battery pack into the battery
compartment and arrange the connectors so
everything fits inside.
CAUTION:
1. Make sure the batteries are
installed with the correct polarity.
2. Do not mix old and new batteries.
3. Do not mix different types
of batteries.
INSTALLING THE TRANSMITTER BATTERY
INSTALLING THE DRONE BATTERY
Connect the battery
pack to the battery
compartments red plug.
