AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909 (toll free)
MODEL No.: DBAF50/40 • 61420 • 07/2018
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909 (toll free)
MODEL No.: DBAF50/40 • 61420 • 07/2018
14
15
- Respect the tool as a working implement.
- Never engage in horseplay.
- Never pull the trigger unless nose is directed toward the work.
- Keep others a safe distance from the tool while tool is in operation as
accidental actuation may occur, possibly causing injury.
• The tool is designed for single-hand use. Do not hold the tool by the front
of the magazine. Do not put hands, head, or other parts of your body
near the bottom of the magazine where the nail or staple exits the tool, as
serious personal injury could be caused.
• Do not point the tool toward yourself or anyone whether it contains nails or
staples or not.
• Do not actuate the tool unless you intend to drive a nail or staple into the
workpiece.
• Always ensure that the workpiece contact is fully positioned above the
workpiece. Positioning the workpiece contact only partially above the
workpiece could cause the nail or staple to miss the workpiece completely
and result in serious personal injury.
• Do not drive nails or staples near edge of material. The workpiece may
split causing the nail or staple to ricochet, injuring you or others. Be aware
that the nail may follow the grain of the wood, causing it to protrude
unexpectedly from the side of the work material or deflect, possibly
causing injury.
• Keep hands and body parts clear of immediate work area. Hold workpiece
with clamps when necessary to keep hands and body out of potential
harm. Be sure the workpiece is properly secured before pressing the
fastener against the material. The workpiece contact may cause the work
material to shift unexpectedly.
• Keep face and body parts away from back of the tool cap when working in
restricted areas. Sudden recoil can result in impact to the body, especially
when nailing into hard or dense material.
• During normal use the tool will recoil immediately after driving a fastener.
This is a normal function of the tool. Do not attempt to prevent the recoil
by holding the tool against the work. Restriction to the recoil can result
in a second fastener being driven from the tool. Grip the handle firmly,
let the tool do the work and do not place second hand on top of tool or
near exhaust at any time. Failure to heed this warning can result in serious
personal injury.
• Do not drive fasteners on top of other fasteners or with the tool at an
overly steep angle as this may cause deflection of fasteners which could
cause injury.
LOADING TOOL
• Do not load the tool with fasteners when any one of the operating controls
is activated.
When loading tool:
• Never place a hand or any part of body in fastener discharge area of tool.
• Never point tool at anyone.
• Do not pull the trigger or depress the workpiece contact as accidental
actuation may occur, possibly causing injury.
SAVE THESE INSTRUCTIONS
• Refer to them frequently and use them to instruct others who
may use this tool. If you loan someone this tool, loan them these
instructions also.