Workzone Titanium DBAF50/40 Скачать руководство пользователя страница 3

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909 (toll free)

MODEL No.: DBAF50/40  •  61420  •  07/2018

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909 (toll free)

MODEL No.: DBAF50/40  •  61420  •  07/2018

4

5

18

19

15

16

14

17

Pack contents / parts

BRAD NAILER / STAPLER 20V - DBAF50/40

1. Application

First time users or inexperienced operators pay particular attention to 

the operation of the 20V Li-Ion Brad Nailer / Stapler, including details of 

starting and stopping and correct use of the 20V Li-Ion Brad Nailer / Stapler 

on pages 22-24, as well as the maintenance instructions on pages 26.
Intended use of the 20V Li-Ion Brad Nailer / Stapler  

(battery / charger not included)
NOTE:
 This product is for private domestic DIY use only. 

It is not suitable for commercial or trade use. 

This 20V Brad Nailer / Stapler is used for such applications including: 

Finishes and trims (Interior and exterior), Door and window casings and 

trims, door jambs, flooring, baseboard paneling, & DIY cabinetry.  

Use the tool only for intended applications.

3. Parts description

WARNING! 

To reduce risk of injury, only use Xfinity Plus battery

packs. Other type of battery packs may burst causing personal injury
and damage. The battery pack must be recharged only with an
Xfinity Plus battery charger.

 

 

WARNING! 

Please read and understand this instruction manual

before use and keep it for your future reference. Your power tool 
should only be passed on together with this instruction manual.

2. Package Content List

1 x Brad Nailer / Stapler
1 x Belt Hook
200 x 32mm Staples 
200 x 40mm Nails 
1 x 3mm Hex Key
1 x Instruction Manual
1 x Warranty Card 

•  Remove all packing materials
•  Ensure all parts on the contents list  

are present

•  Check the appliance, and all 

accessories for transportation 

damages

1.  Safety striker pin
2.   Workpiece contact (nail/staple release)
3.  Depth adjustment wheel
4.  Cylinder (internal)
5.  Soft grip handle
6.  Trigger switch
7.  LED worklight switch
8.  Belt hook
9.  Single/contact firing slider knob
10.   LED Battery and function indicator

11. Magazine
12.  Indicator window
13.  LED Worklight (both sides)
14.  Magazine release latch
15.   200 x 32mm Staples 
16.   200 x 40mm Nails 
17.       Battery 

(not included; shown only  

for illustrative and instructional  

purposes only)

18.   Charger 

(not included; shown only  

For illustrative and instructional  

purposes only)

19. 3mm Hex Key

8

7

6

4

4

5

17

1

3

2

12

9

11

10

13

Содержание Titanium DBAF50/40



















Отзывы: