9. SYSTEM MENU (SETTINGS)
9.6.1 Measurement
MEASUREMENT category contains se ngs of measurement parameters such as emissivity, background and at-
mospheric temperature. You can also switch the calibra on tables for different lenses if you are using more
than one of them. In case of ge ng lost, there is also DEFAULT op on which sets the default measurement
parameters.
Figure 9.13 – Measurement menu.
MEASUREMENT menu consists of the following items:
EMISSIVITY - Emissivity of measured surface
REFL TEMP - Background temperature reflected by the scene
ATM TEMP - Temperature of the atmosphere
LENS - Select appropriate lens from the list a er physically changing your lens. This op on is available only
with mul ple lenses.
DEFAULT - Sets default measurement parameters
9.6.2 Display
DISPLAY category contains se ngs of what should be displayed on the screen. It allows user to choose temper-
ature units, set the period of infrared camera calibra on and choose which GPS informa on will be available in
status bar. Also, four different resolu ons and five languages can be set.
The na ve resolu on of the WIRIS is 1024 x 600 so it is recommended to use when possible. In case that you have
set resolu on that is not supported by your monitor, press and hold the on/off bu on for at least 10 seconds.
A er than, WRIRS will reboot to the 1024x600 resolu on.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Revision 1.0 EN, 24
th
Jan, 2017
All pictures are only for illustra on.
Real values may vary.
33
