4. WARNING AND CAUTIONS
4
Warning and Cau ons
4.1 Warnings
Before using the product, please check that there is no visible damage or malfunc on. If there are any visible
signs of damage or other defect on the device, then on no account should it be installed or put into opera on.
Any interference and non-cer fied service opera ons into the product leads to an automa c loss of warranty.
4.2 No fica ons
Do not use or store the device in conflict with the storage and opera ng condi ons laid down in this manual
(only for hardware).
Do not point the infrared camera (with or without the lens cover) at strong energy sources, for example,
devices that cause laser radia on, or the sun. This can have an unwanted effect on the accuracy of the
camera. It can also cause damage to the detector in the camera.
Plug the camera to its own power source. Do not plug the camera into the same power source as drone’s
motors.
Do not plug any power to the GPS/Mavlink power pin.
Do not use the Workswell WIRIS system in temperatures higher than +50
◦
C (+122
◦
F). High temperatures
can cause damage to the camera.
Do not use the Workswell WIRIS system in temperatures lower than -15
◦
C (+5
◦
F). Low temperatures can
cause damage to the camera.
Do not apply solvents or equivalent liquids to the cameras, the cables, or other items. Damage to the items
can occur.
Be careful when you clean the infrared lens. The lens has an an -reflec ve coa ng which is easily damaged.
Do not use too much force to clean the infrared lens. This can cause damage to the an -reflec ve coa ng.
The encapsula on ra ng is only applicable when all the openings on the all components of the system are
sealed with their correct covers, hatches, or caps.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Revision 1.0 EN, 24
th
Jan, 2017
All pictures are only for illustra on.
Real values may vary.
7
