Workshop WS1200SS0, Руководство пользователя

Страница: 6 / 60

6
The metal handle comes packaged in the
carton in the reverse direction. The metal
handle must be removed from the handle
receptacles and reinstalled in the correct
position. Remove the metal handle by
pressing and holding in the release
buttons, while pulling handle upwards.
Installing Handle
Press and hold release buttons while
installing handle into handle receptacles
in drum (See illustration).
NOTE: An audible snap of release
buttons indicates successful engagement
of handle.
Lowering Handle for Storage
To store Wet/Dry Vac, press and hold
release buttons while firmly sliding handle
down.
Installing Accessory Bag
Install Accessory Bag as shown with
extension wand holders facing unit.
Correct
Position
Storage
Position
Moving
Position
Metal Handle in
Reversed Position
(As Shipped)
Accessory Bag Snaps
Accessory
Bag Straps
(4)
Handle
Extension
Wand
Storage
Locations
REMOVING/INSTALLING THE METAL
HANDLE
(Applies Only to WS1600SS0)
SP6851 Workshop 7/23/12 10:39 AM Page 6