Work Pro AM 105, Руководство пользователя

Страница: 15 / 17

VCR AUX
CD DVD
1 2
3 4
5
6
7 8
A
B
C
D
MEMORY
SCAN
AUTO
POWER
TUNER
MUTE BALANCE
VOL
AM/FM
TREBLE
BASS
SLEEP
REMOTE CONTROL
1. Input selector buttons
Press these buttons to select an input source.
2.A/B/C/D button
Press the buttons to select a group of preset stations.
3.SLEEP button
Press the button repeatedly to turn the sleep timer on and off,
and set the sleep time(10-20-30-40-50-60-70-80-90mins).
4.BALANCE Parameter selector button
Press the button to select balance parameter. then press the
"8" button to adjust the balance between left and right.
5.MUTE
Mute the sound. Press again to restore the audio out to the
previous volume level.
6.BASS Parameter selector button
Press the button to select bass tone, then press the "8" button
to adjust the low-frequency response.
7.TREBLE Parameter selector button
Press the button to select treble tone, then press the "8" butt-
on to adjust the high-frequency response.
8.PARAMETER selected and MASTER VOLUME
adjustment buttons
To adjust parameter selected or main volume.
9.Power button
Press this button to set this in the standby mode. Press again
turn on the power of this unit.
10.Number 1-8 button
Press the button to call preset station number.
11.MEMORY button
Use the button to enter a station to memory.
12.FM/AM band switches button
Press the button to switch the reception band between FM and
AM.
13.TUNER automatic tuning button
Press and hold the button 3 seconds, all stations are browsed
and stored automatically.(AM/FM is detached)
12
CONNECTING AUXILIARY COMPONENTS
1
2
3
4
5
6
7
9
11
13
14
10
8
12
14.TUNING SCAN+,SCAN- buttons
Press the SCAN+ side to tune in to a higher frequency.
Press the SCAN- side to tune in to a lower frequency.
Press and keep two second minutes, scan automatically.