Work Pro AM 105, Руководство пользователя

Страница: 14 / 17

AUDIO
RECEIVER
R L
199
CD
PLAYER
CONNECTING A COMPACT DISC PLAYER
Using one paired (red/white) stereo cable, connect your new
receiver to your compact disc player as shown to the right.
To play a CD, press CD, put the receiver in CD mode and
press PLAY.
NOTE:
The AUDIO SOURCE connection can be used as input for any stereo
audio signal.
11
CONNECTING AUXILIARY COMPONENTS
BEFORE YOU CONNECT.....
-
Protect components from power surges.
- Connect all components before plugging power cords into the
wall outlet.
-
Always turn off the receiver and/or components before you
connect or disconnect any cables.
- Always make sure the color-coded plugs match the color of
the terminals in which they are inserted.
- The connection cable plugs and jacks are color-coded as
follows:
Speaker Terminals: Red for positive (+) terminals. Black for
negative (-) terminals.
- Some units may be supplied with connection plugs that are
color-coded red and black instead of red and white. In this
case, the black plug takes the place of the white plug.
- Insert all cable plugs firmly into their jacks.
-
Place audio/video cables to the sides of the receiver's back
panel instead of straight down the middle after you connect
the components.
-
Try not to coil any power cables and keep them away from
the audio/video cables as much as possible.
- Make sure all antennas and cables are properly grounded.
Refer to the Safety Tips sheet packed with your receiver.
CONNECTING THE CABLES POSITION CABLES CORRECTLY TO AVOID
AUDIO HUM OR INTERFERENCE
STER EO REC EIVE R AMPLI FIER