SPRAY GUN
INTENDED USE
The power tool is only intended for atomising solvent-based and water-dilutable lacquers, glazes, primers, clear lacquers,
automotive top coats, wood stains and oils.
The power tool is not suitable for use with dispersion and latex paints, caustic solutions, acidic coating materials, spray material
containing grains or solids, and spatter and drip resistant materials.
TECHNICAL SPECIFICATIONS
Model
SG04-1000 / 10A2302
Rated Voltage
230VAC / 50Hz
Insulation class
II
Rated power
400W
Declaration sound pressure level
LpA=84,6dB(A), K=3dB(A)
Max. spray flow (water)
800ml/min
Declaration sound power level
LwA=95,6dB(A), K=3dB(A)
Max. Viscosity
70 DIN
Declration of vibration
ah<2,5m/s
2
, K=1,5 m/s
2
Tank capacity
1000ml
Weight
1.4kg
Spray mouth diameter
Ø2.6mm / Ø1.8mm
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify
additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Pull out mains plug immediately, if the mains cable is
damaged, entangled or severed. Always remove the
mains plug before working on the device.
Read the manual.
Wear ear protection.
Wear eye protection
Wear breathing protection
Electrical appliances must not be
disposed of with the domestic waste.
Protection class II
PRODUCT ELEMENTS
1
Air filter cover
9
Spray trigger
2
SDS lock knob
10
Vent cover
3
Cable
11
Spray material tank
4
Handle
12
DIN cup
5
Additional
Ø1.8mm spray mouth
13
Clean needle
6
Air cap
14
Clear brush
7
Ø 2.6mm Spray mouth
15
Additional air filter
8
Thumbwheel for spraying capacity
SAFETY
General Power Tool Safety Warnings
Read all safety warnings and all
instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mainsoperated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
●
Keep work area clean and well lit. Cluttered or dark
areasinvite accidents.
●
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases ordust.
Power tools create sparks which may ignite the dust or
fumes.
●
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
●
Power tool plugs must match the outlet. Never modify
