1
BATTERY LED LAMP
IN
INTENDED USE
The cordless worklight is intended for mobile illumination in limited space and for limited time in dry indoor and is not suitable for
general room lighting.
This lamp is not tools for children, do not let children use this lamp.
TECHNICAL SPECIFICATIONS
Article number: CLED-S20Li-30W
Rated voltage
20VDC
Light source
COB
LED power
I:15W / II:30W
Working temperature
-10
0
C to +40
0
C
Luminous Flux(Max)
3000 Lumen
Degree of protection
IP20
correlated colour temperature
>80
Protection class
III
Color Rendering Index
5500-6500K
Working time (4Ah)
I: 6h / II: 3h
EXPLANATION OF SYMBOLS
Attention!
Always remove the battery pack before do any
adjustment or maintainence on the device.
Read the manual.
Do not stare into the light beam
For indoor use
Class III tools
Electrical appliances must not be
disposed of with the domestic waste.
Store the battery only in dry rooms with an ambient
temperatur
e of +10°C to +40°C. Place only charged
batteries in storage (charged at least 40%).
SAFETY
• Please read and observe all safety warnings and in-structions
enclosed with the battery or worklight with which the battery
was provided.
• Handle the cordless worklight with care. The cordless
worklight generates intense heat, which leads to increased
danger of fire and explosion.
• Do not work with the cordless worklight in hazardous areas.
• After the automatic shut-off of the cordless worklight, do not
continue to press the On/Off button. The battery could become
damaged.
• Do not direct the light beam at persons or animals
and do not stare into the light beam yourself (not even
from a distance).
• Use only original accessories.
• Do not cover off the lamp head while operating the
cordless worklight. The lamp head heats up during
operation and can cause burns when the heat
accumulates.
• Do not use the cordless worklight in road traffic. The
cordless worklight is not approved for illumination in road traffic.
• Before any work on the cordless worklight itself (e.g.
assembling, maintenance, etc.), as well as when trans- porting
and storing, remove the battery from the cord- less worklight.
• Do not allow children to use the cordless worklight. It is intended
for professional use. Children can unintentionally blind themselves
or other persons.
• This cordless worklight is not intended for use by children and
persons with physical, sensory or mental limitations or a lack of
experience or knowledge.
• Use only the carrying handle to carry and align the cordless
worklight. The heat sink can heat up during operation.
• Do not open the battery. Danger of short-circuiting. Protect the
battery against heat, e. g., against continuous intense sunlight,
fire, water, and moisture. Danger of explosion.
• When battery pack is not in use, keep it away from other metal
objects like paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns
or a fire.
• Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, addition- ally
seek medical help. Liquid ejected from the battery may
cause irritations or burns.
• In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can
irritate the respiratory system.
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
• Use the battery only in conjunction with the product.
This measure alone protects the battery against
dangerous overload.
• The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit can occur and the battery can
burn, smoke, explode or overheat.
• Prevent dust accumulation at the workplace. Dust
can easily ignite.
ASSEMBLY & OPERATION
