User manual
Treatment crush: SA0042
Version: 10 February 2021 08:02:46
Page 29 of 34
6.4. Check the oil level/change the oil
EXPLANATION
Checking the oil level ensures that the minimum necessary amount of oil is
present. The cylinders must be retracted to do this. The plug must be
unplugged from the electrical outlet.
As a general rule, the oil and filter should be changed once per year.
Figure 9: overview of filling hydraulic unit
Checking the oil level
No.
What to do
Action
Result
1. Retract the cylinders
Place the cylinders of the installation in
the retracted position by operating the
valves.
2. Switch off the controls.
Make sure the emergency stop buttons
are pressed in.
Disconnect the power supply from the
power source.
3. Check the oil level
The oil level should now be between the
minimum and maximum levels (see
instructions for “changing oil”).
Maximum oil level
Fill oil level to here
Minimum oil level
