User manual
Treatment crush: SA0042
Version: 10 February 2021 08:02:46
Page 28 of 34
6.2. Cleaning the machine
EXPLANATION
A pressure washer may be used for cleaning.
When cleaning with a pressure washer, avoid spraying on bearing points,
winches and motors. This can lead to a sharp reduction of the service life.
When cleaning with a pressure washer, avoid spraying on electrical
components. This can lead to short circuits and a sharp reduction of the
service life.
6.3. Lubricating the back gate
EXPLANATION
The back gate is extended using gas springs mounted in the gate.
To prevent grease entering the gas pressure spring area and causing damage,
the gate should only be lubricated when the gate is fully retracted.
Figure 8: overview of lubricating the back gate
No.
What to do
Action
Result
1. Retract the back gate
Attach the rear leg strap or hook to the
back gate and pull it up until the back gate
is fully retracted.
2. Grease the nipples
Lubricate the back gate nipples with a
grease gun.
1
2
3
