User manual
Treatment crush: SA0042
Version: 10 February 2021 08:02:46
Page 15 of 34
Figure 2
Component
Description
Section/l
ocation
1
Power supply cable
with plug
To connect the machine to the power supply.
2
Emergency stop
buttons
The emergency stop shuts down all movements.
3
Relay box
There is a switch box on top of the crush. This
contains the control elements for the respective
crush.
4
Control buttons
At the left rear, there is always a light switch, on/off
switch and a start/reset button.
For 230 V, there is also a constant running button to
keep the motor running constantly.
5
Electrical outlets
E.g. an angle grinder and/or blow-dryer can be
connected. (maximum total 3500 Watts)
1
2
3
4
5
Figure 2: Overview of the electrical system.
