7
Pedelec Sensor for Octalink type crank sets:
The diameter of the Octalink axle is greater and so the regular pedelec disc cannot be used. We are how-
ever able to provide a solution for this type of bottom bracket. We supply a modified pedelec disk which
has a larger hole in the centre which can be used, it needs to be secured to the back of your smallest
chain-ring in the case of double or triple rings. The sensor itself is then attached to the base of the seat
tube.
Pedelec disc
With the sensor in place as per the photo above, it now needs to be secured, the way you achieve this
may vary depending on your specific bike. In this example, we’re just using some cable-ties.
The sensor is mounted at the base of the seat tube. The sensor is supplied with a single cable-tie which is
use to secure the sensor to the seat tube.
Sensor
To controller
Cable-tie for
securing to
seat tube.
