11
Handlebar Components cont.
You must ensure that there is enough play in the cables so that they do not get stretched or pulled when
the handlebars are rotated.
The throttle cable and LCD connectors are colour coded and should be mated with the matching colours
on the modular cabling. There are arrows on each connector which indicate how to line them up, see
photos below.
Ensure that the arrows line up on both sides before pushing the connectors firmly together, be careful
with them and don’t force them or you may bend/damage the pins. Also be sure to mate the cables with
the matching coloured connectors.
If you have too much slack in the cables, you will need to secure them with cable-ties as tidily as possible.
Ensure that none of the cables are hanging loosely or in a position where they may get caught on any oth-
er parts whilst the bike is being ridden.
Note:
The display connectors are green in some cases rather than black.
