Accessing Web Interface
48
01/2019-v1.0en
7.4
Accessing the Web Interface
Once the treadmill is set up on the network, the web interface can be accessed via
web browser. Google Chrome is the recommended web browser to ensure optimum
performance.
Locate the IP address in Settings on the Network tab. Go to the web browser on a
computer. Type the following into the address bar:
XXX.XXX.XXX.XXX:5678 (
Where X is the IP Address)
This allows the web browser to connect to the treadmill at the IP address using Port
5678.
Fig. 77 Accessing the web interface
If there is a popup saying, “View Mode”, as shown above, the user is only able to
view content. Full control must be enabled in
Settings
(Password:
8020
). Navigate
to the
UI
tab and change Share UI to
Full Control
, see Section 6.5 page 31 (3. Set-
tings – UI) for details.
WARNING
Danger of Damaging the ProSmart Console!
This will allow full control of the treadmill from any computer on the same
network.
Some features are only accessible via web browser. For example:
This allows a user to upload a custom workout that was written in XML. See Section
page 62
for more details.
From the web interface a user can upload a custom image for the center of the
home screen.
Update the treadmill from a file on a computer instead of having the treadmill auto
update from the internet. See Section 7.6
page 50.
Program Upload
Main Page Logo
Upload and Update