10
A Very Safe Fence at a Very Low Cost
After your posts and horizontal rail have been set you can now set your brace wire.
Use a piece of ElectroBraid
®
and loop it around both posts, going from the bottom of
the end post to the top of the brace post. Pull the ends together and fasten them by
tying a knot or with a poly rope connector, (See Splicing ElectroBraid
®
). Set a nail at an
appropriate location on the end post so the brace wire will not slide up. For brace wire
you can use any material meant to have longevity for an outdoor, high tension use such as
ElectroBraid
®
or hi-tensile wire.
NOTE: To prevent an electrical short, make sure the brace wire and
tensioning stick cannot contact any ElectroBraid
®
strands.
Ensure all braces have been completed BEFORE installing ElectroBraid
®
.
®
®
®
