8
A Very Safe Fence at a Very Low Cost
Installing Corner & End Posts/Braces
ElectroBraid
®
is a tension system which requires proper bracing.
For proper performance, ensure each of the following are properly braced:
CORNERS
– Any change in direction greater than 20 degrees should be considered a
corner and properly braced.
ENDS
– You normally have an end post where you terminate or start a fence:
· For a gateway
· To divide and existing paddock into sections (cross fencing).
· To start or terminate a run (e.g. the side of a barn).
IN-LINE BRACING
–
Whenever you fence a long, straight run you need to terminate and install a brace
system every 2000 feet to maintain tension on the Braid
™
.
Proper Bracing will increase the effectiveness of your fence and reduce maintenance
caused by post shifting. Incorrect or insufficient bracing may lead to fence failure and
may be dangerous to you and your horses.
After properly clearing the area you intend to fence, install all corner, end and gate
posts. We recommend your posts be at least 5” to 6” in diameter (pressure treated for
longevity). How deep to set the posts will depend on the type of soil and the exposure
to frost in winter. Ensure all bracing has been completed BEFORE proceeding with
installing ElectroBraid
®
.
®
®
®