Woodstock Shop fox W1856, Руководство пользователя

Страница: 32 / 52

-30-
Model W1856 (For Machines Mfd. Since 02/19)
O
PE
R
ATIO
NS
Selecting.Turning.Tools
Lathe tools come in a variety of shapes and sizes, and
usually fall into five major categories.
Figure.32. Example of a gouge.
Figure.34.
Example of a round-nose
scraper.
Figure.33.
Example of a skew chisel.
Figure.35.
Example of a parting tool.
•
Gouges
—Mainly used for rough cutting, detail
cutting, and cove profiles. The rough gouge is a
hollow, double-ground tool with a round nose, and
the detail gouge is a hollow, double-ground tool with
either a round or pointed nose.
• Skew.Chisel —A very versatile tool that can be used
for planing, squaring, V-cutting, beading, and parting
off. The skew chisel is flat, double-ground with one
side higher than the other (usually at an angle of
20°–40°).
•
Scrapers
—Typically used where access for other tools
is limited, such as hollowing operations. This is a
flat, double-ground tool that comes in a variety of
profiles (round nose, spear point, square nose, etc.)
to match many different contours.
• Parting.Tools —Used for sizing and cutting off work.
This is a flat tool with a sharp pointed nose that may
be single- or double-ground.
• Specialty.Tools —These are the unique, special
function tools to aid in hollowing, bowl making,
cutting profiles, etc.