Woodstock SHOP FOX W1667, Инструкция по эксплуатации

Страница: 27 / 36

-25-
Since all bearings are shielded and permanently
lubricated, simply leave them alone until they
need to be replaced. Do not lubricate them.
For other items on this machine, such as the
quill, table and column, an occasional applica-
tion of light machine oil is all that is necessary.
Before applying lubricant, clean off sawdust and
metal chips.
Your goal is to achieve adequate lubrication.
Too much lubrication will attract dirt and saw-
dust. Various parts of your machine could loose
their freedom of movement as a result.
Periodic maintenance on your Model W1667
8
1 ⁄
2
'' Oscillating Drill Press will ensure its opti-
mum performance. Make a habit of inspecting
your drill press after each use.
Check for the following conditions and repair
or replace when necessary.
1. Loose mounting bolts.
2. Worn switch.
3. Worn or damaged cords and plugs.
4. Damaged drive belts.
5. Any other condition that could hamper the
safe operation of this machine.
Keep the table and other unpainted surfaces
rust-free with regular applications of products
like Boeshield
®
T-9. For long term storage con-
sider products like Kleen Bore's Rust Guardit™.
NEVER adjust or service
the machine while it is
running. Wait until the
machine is turned off,
unplugged and all working
parts have come to a stop
before proceeding!
NOTICE
Contrary to some beliefs, worn abrasives are
not the equivalent the next finer grit abra-
sive. Discard worn sanding sleeves and avoid
the temptation to use them beyond their
usable life.
MAINTENANCE
Sanding Sleeves
As sanding drums are used, the abrasive sleeve
will quickly become "loaded" with sawdust. If
not removed, this sawdust will harden on the
abrasive surface, rendering the sleeve useless.
Routinely clean the sanding sleeve with a rub-
ber gum abrasive cleaner like the PRO-STIK
®
cleaners as shown on
Page 33
.
Always discard worn sanding sleeves. As abra-
sive sleeves begin to wear, grit will begin to
fall off and cause gouges in the workpiece.
Glue used to hold the grit to the paper will rub
off onto the workpiece interfering with the
final finish.
Table and Base
Lubrication
General
MAINTENANCE