Woods DBH5.30, Руководство оператора

Страница: 39 / 62

Assembly 39
MAN1248 (2/26/2018)
Figure 35 . Counter Balance Weight Assembly
Woods Counter Balance (Optional)
(See Figure 36)
Counter balance weights are supplied as an accessory
using counter balance kit, part number 1045138. Refer
to Parts section. Weights are required to shift the
attachment center of gravity towards the center of the
hitch. Operators are to be aware of tractor stability
when deck is fully extended. (Refer to Figure 36 to
understand the application). Two skids (1), nine Woods
counter balance plates (2) and six 3/4" cap screws (3)
and lock nuts (4) are provided.
1. Place a single weight (2) upon the hitch as shown.
2. Clamp first weight (2) and skids (1) to hitch using
cap screws (3) and lock nuts (4).
3. Stack remaining weights on top of first weight.
Position weights to the right allowing cap screw (3)
and lock nut (4) clearance thru left side of hole
profile.
4. Clamp weight stack to the first weight using cap
screw (3) and lock nuts(4).
Additional counter balance weights are available using
part number 1045139. Refer to Parts section.
1. Skid (Bottom)
2. Bar, counter-balance (Top)
3. 3/4 NC x 8 HHCS, GR5
4. 3/4 NC Lock nut