16 Service
MCPBH-B (Rev. 4/20/2007)
Figure 18.
Depth Jack Removal
1. Support the planer with a hoist so there is no
weight on the depth arm (1) as shown in Figure 18.
2. Remove the depth jack pins (2 and 3).
Depth Jack Installation
1. Support the planer with a hoist so there is no
weight on the depth arm (1) as shown in Figure 18.
2. Install the depth jack pins (2) and (3).
Pick Removal
1. Insert the pick removal tool (1) into the slot on the
pick (2) as shown in Figure 19.
2. Hit the pick removal tool on the round protrusion to
drive the pick out (3).
Figure 19.
Always wear relatively tight and belted clothing
to avoid getting caught in moving parts. Wear
sturdy, rough-soled work shoes and protective
equipment for eyes, hair, hands, hearing, and head;
and respirator or filter mask where appropriate
.
Pick Installation
1. Insert the pick tool (1) into the slot on the pick (2)
as shown in Figure 20.
2. Drive the pick into the holder by striking the tool on
the circular protrusion (3).
NOTICE
■
DO NOT INSTALL PICK BY HITTING THE POINT
OF THE PICK as this may cause damage to the pick
and premature failure.
Figure 20.
LUBRICATION
Lubrication Points
All grease points should be serviced after 40 hours of
operation.
• Front and rear wheels (1)
• Flag pin (2)
• Deadshaft bearing (3) as shown in Figure 20.
NOTICE
■
Planetary gearbox lubricant must be changed
after the first 50 hours of operation and every year
or 1000 hours of operation, thereafter, whichever
occurs first. Use only API 80W90 GL5 gear oil.
A
WARNING
