Service 13
MCPBH-B (Rev. 4/20/2007)
Figure 8.
Planetary Removal
1. Remove two motor bolts (1). Remove the motor
from the planetary as shown in Figure 9.
2. Perform Steps 1 through 8 of Drum Removal
instructions, page 12.
Figure 9.
Planetary Installation
1. Perform Steps 2 through 7 of Drum Installation
instructions, page 13.
2. Insert the motor into the planetary (1) as shown in
Figure 10. Install two 1/2" –13 bolts (2), two 1/2"
lock washers (3), and two 1/2" flat washers (4).
3. Torque to 90 lbs-ft. (122 N-m).
Figure 10.
Motor Removal
1. Remove and plug the pressure, return and case-
drain hoses.
2. Remove two motor bolts (1) as shown in Figure 9.
Remove the motor from planetary.
Motor Installation
1. Insert the motor into planetary (1) as shown in
Figure 10. Install two 1/2" –13 bolts (2), two 1/2"
lock washers (3), and two 1/2" flat washers (4).
2. Torque to 90 lbs-ft. (122 N-m).
3. Install the pressure (A), return (B), and casedrain
(C) hoses.
Drum Installation
1. Install the bearing (1) to the drum (2) as shown in
Figure 11.
2. Install four 1/2" –20 nuts (4) and four 1/2" flat
washers (5). Torque nuts to 90 lbs-ft. (122 N-m).
3. Grease the bearing (3).
