4 Introduction
MCPBH-B (Rev. 4/20/2007)
GENERAL INFORMATION
SPECIFICATIONS
CP16BH
CP18BH
CP24BH
Planing Width
16 inches
18 inches
24 inches
Planing Depth
0-6 inches
0-6 inches
0-6 inches
Hydraulic Horsepower Required
30-60 hp
30-60 hp
30-60 hp
Number of Carbide Picks
50
56
70
Hydraulic Flow Required
25-40 gpm
25-40 gpm
25-40 gpm
Hydraulic Pressure Required
2000-3500 psi
2000-3500 psi
2000-3500 psi
Operating Weight
900 lbs
1100 lbs
1380 lbs
Planetary Gearbox Capacity
31 oz
31 oz
31 oz
Planetary Lubricant
80W-90 GL5 or
EP90
80W-90 GL5 or
EP90
80W-90 GL5 or
EP90
The purpose of this manual is to assist you in operating
and maintaining your backhoe cold planer. Read it care-
fully. It furnishes information and instructions that will
help you achieve years of dependable performance.
These instructions have been compiled from extensive
field experience and engineering data. Some informa-
tion may be general in nature due to unknown and vary-
ing operating conditions. However, through experience
and these instructions, you should be able to develop
procedures suitable to your particular situation.
The illustrations and data used in this manual were cur-
rent at the time of printing but, due to possible inline
production changes, your machine may vary slightly in
detail. We reserve the right to redesign and change the
machines as may be necessary without notification.
Throughout this manual, references are made to right
and left directions. These are determined by standing
behind the equipment facing the direction of forward
travel. Drum rotation is counterclockwise as viewed
from the right side of the cold planer.
