Woodley Clinispin MPC, Руководство оператора

Страница: 7 / 20

SAFETY PRECAUTIONS
• Never use the centrifuge in any manner not specified in this manual.
• Equipment used in any manner not specified in this manual or by the
manufacturer, the protection provided by the equipment may be impaired.
• Never move the centrifuge while the rotor is spinning.
• The rotor and the rotor lid must always be securely fastened. If the centrifuge
makes unusual noise during operation, the rotor or rotor lid fitment needs to be
checked. Switch off the device immediately by pressing STOP, check rotor lid &
fasten securely.
• The rotors must be loaded symmetrically. Each tube should be counter balanced
by another tube of same weight and volume.
• Do not use centrifuge or rotor that have not been correctly installed or damaged.
• Repairs must only be performed by authorised service technician.
• Only use recommended original rotors and spare parts.
• Centrifuge may be used for the specified applications only. It must not be
operated in a hazardous or flammable environment and must not be used to
centrifuge explosive or highly reactive substances. Also do not place the
potential hazardous material within the clearance area/envelope.
• If liquids are spilled on the rotor or rotor chamber, the centrifuge must be cleaned
carefully and properly before being used again.
• Prior to centrifugation, the tubes should be visually inspected for material
damage. Damaged tubes may not be centrifuged. This is because broken tubes
can, in addition to sample loss, create imbalance which can result in further
damage to the centrifuge and accessories.
• Rotors and rotor lids are high-graded components which are subject to extreme
mechanical strain. Even slight scratches and tears can lead to serious internal
material damage. Ensure to check rotor for any signs of damage before use.
• Rotor & rotor lid showing visible signs of corrosion or mechanical damage should
not be used.
page 6