An ongoing program of product improvement may require us to change specifications without notice.
30
Bistro Home Oven Installation and Operation Manual
woodstonehome.com
tf. 800.578.6836
f. 360.734.0223
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 U.S.A.
M0003.06
Rev. July 2015
Mantle Stone Installation
4.
Dry fit the stone to ensure proper fit.
Apply a generous amount of silicone adhesive to the top of the
Mantle Bracket.
Slide the stone over the Door Posts and position the stone in
place. Apply light pressure to seat it properly. Make sure edges of
the stone line up with the edges of the Mantle Bracket. Allow the
sealant to set for several hours before filling any gap between the
stone slab and the Mantle Bracket with the silicone sealant. Clean
up any sealant before it dries.
5.
Reinstall Door Post hardware in reverse order from disassembly. Use a small amount of silicone sealant under
the Brass Flange.
Tighten Mantle Bracket to oven.
Reinstall Mantle Faceplate Cover.
Reinstall Swinging Doors.
3. Remove Door Post hardware by following the steps below.
3a.
Remove the Set Screw from the
top of each post. Put in a safe
place.
3b.
Pull ou the Door Restraining
Pin. Put in a safe place.
3c.
Slide the Brass Flange up to
remove. Put in a safe place.