29
Bistro Home Oven Installation and Operation Manual
On-site installation of mantle stone
Bistro Home ovens can be ordered with the optional Mantle Bracket to facilitate the installation of a custom
granite (or similiar stone) mantle on-site. The installation process is described below.
Mantle Stone Installation
2. Remove Mantle Bracket Faceplate Cover by remov-
ing the screws securing it. Here we show a BH-3030,
which has 3 screws; models BH-4343, BH-4355 and
BH-4836 have 4 screws.
1. Remove the two Swinging
Doors by sliding them up
over the Door Posts. Put in a
safe place.
For facade-ready models only
(models with factory-installed cement board, ready for facade material installation)
mantle bracket
faceplate
mantle bracket
2a.
Loosen the 3 bolts across the
oven face and 2 carriage bolts
on either end of the Mantle
Bracket so the Mantle tips away
from the oven.
2b.
To reach the carriage bolts,
it is necessary to remove the
panel under the Control Box.
The panel is fastened by two
screws on the back lip.
On facade-ready models, there's a flange
overhanging the Mantle Bracket. The
stone is unable to slide down over the
Door Posts because of this flange.
To clear this flange, follow the steps
below, then continue on to step 3.
Carriage Bolts
Extended Flange
2c.
Loosen the bolts enough so the
Mantle Bracket can tip forward
just enough to clear the flange
surrounding the doorway.
Alternatively, the Mantle Bracket
can be removed completely.