ONCE YOU HAVE MOVED THE APPLIANCE TO WHERE IT WILL BE INSTALLED, PLEASE SEE THE ASSEMBLY
CONNECTIONS SECTION FOR INSTRUCTIONS REGARDING ELECTRICAL AND GAS CONNECTIONS.
IF YOU NEED TO DISASSEMBLE THE OVEN TO MOVE IT THROUGH A NARROW DOOR OR PASSAGEWAY,
SEE DISASSEMBLY SECTION.
Bistro models are shipped fully assembled. The oven can be moved into place with a pallet jack using the LOWER
forklift pockets. If the oven is to be installed against a wall, you may need to leave access to the back of the oven to
complete the utility connections. NOTE: Rear panel MUST be installed.
CAUTION:
The 3030 model Bistro weighs approximately 1,100 lbs
The 4343 model Bistro weighs approximately 2,100 lbs
The 4355 model Bistro weighs approximately 2,500 lbs
The 4836 model Bistro weighs approximately 1,800 lbs
The appliances are very top-heavy. IF THE APPLIANCE TIPS IT CAN CAUSE SEVERE INJURY OR DEATH! NEVER
ATTEMPT TO USE A HAND TRUCK TO MOVE THE APPLIANCE! The appliance should only be moved using a
pallet jack on a LEVEL FLOOR. If the appliance must be moved over an inclined surface, a forklift or other suitable
means should be employed. If the installer does not have the equipment or experience required to move the
appliance safely, we recommend you secure the services of a qualified rigging company.
The oven should only
be moved using a pallet
jack on a LEVEL FLOOR. If
the oven must be moved
over an inclined surface,
a forklift or other suitable
means should
be employed.
Never attempt to use a
hand truck to move
the oven.
Make sure the pallet jack
wheels do not contact
the underside of the fork
pocket when lifting to
avoid damaging
the stand.
An ongoing program of product improvement may require us to change specifications without notice.
12
Bistro Home Oven Installation and Operation Manual
woodstonehome.com
tf. 800.578.6836
f. 360.734.0223
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 U.S.A.
M0003.06
Rev. July 2015
Moving the Bistro