Wood-mizer LTAGA-CBN, Руководство пользователя, Страница: 37 / 56

Replacement Parts
Clamp & Oil System
Replacement Parts CBNdoc080917 5-5
5
8 Nut, #10-24 Hex Lock F05010-42 2
Instruction Sheet, CBN Clamp Retrofit/Replacement 010755-568 1
9 MAGNET, FILTER P31347 2
10 PLATE, PUMP TRAY 010756 1
11 PUMP, AGA P09836 1
12 WASHER, 1/2” SAE FLAT F05011-2 1
13 BOLT, 1/2-20 X 1 1/4” HEX HEAD GRADE 5 F05008-108 1
14 BLADE, WIPER S30265 2
15 WIPER WELDMENT, LTAGA 010728 1
16 STUD, 1/4-20 X 1/2” WING F05005-16 4
OILER ASSEMBLY, GRINDING WHEEL 010724 1
17 Barb, 3/8” Hose X 1/4” Male NPT Elbow P04730 2
18 Plate, Oiler Side 060135 1
19 Block, Oil Trough 010730 1
20 Bolt, 1/4-20 x 2” Hex Head Grade 5 F05005-125 2
21 Washer, 1/4” SAE Flat F05011-11 2
22 Nut, 1/4-20 Nylon Lock F05010-69 2
23 Bracket, Oil Trough Mounting 010735 1
24 FITTING, 1/4” NPT BRASS TEE 010720 1
25 FITTING, 1/4” NPT HEX NIPPLE P09144 1
26 FITTING, 3/8” TUBE X 1/4” NPT NYLON ELBOW P04730 2
27 CLAMP, 5/8” EMT COATED 010748 1
28 VALVE, 1/4” LOC-LINE P09835 1
29 BOLT, 1/4-20 X 1/2” HEX HEAD F05005-15 1
30 WASHER, 1/4” SAE FLAT F05011-11 1
31 PLATE, OIL TROUGH SPACER
060198
2
1
32 BOLT, 1/4-20 X 2 1/4” HEX HEAD
F05005-72
2
2
33 HOSE, 3/8”OD X 1/2” ID X 4’ OIL 010739 1
1
Clamp Retrofit 060190 available to allow clamp to accept 1 3/4” & 2” wide blades ( See Section 5.6 ). New clamp requires shorter
mounting bolt F05008-42. Longer bolts and spacers provided for lift assembly to allow higher range of movement for grinding head.
2
For use with blades with 1 1/8” tooth spacing only.