Assembly
Blade Support Installation
2
2-9
CBNdoc080917
Assembly
See Figure 2-7.
The guide assembly for the right support arm also includes a plastic
roller and lock washer. Place the plastic roller and lock washer over the blade support
post. Join the guide assembly onto the end of the blade support arm, post facing inward
as shown. Continue assembly as above.
Tilt the guide on the left blade support arm slightly backward, toward the rear of the sharp-
ener, and adjust to 5" (12.5 cm) from the end of the arm. Tilt the guide on the rear blade
support arm slightly to the right and adjust to 1" (2.5 cm) from the end of the arm. Tilt the
guide on the right support arm slightly forward and adjust to 3" (7.5 cm) from the end of
the arm.
FIG. 2-7