Wood-mizer EG350EH15S, Руководство пользователя

Страница: 38 / 65

SETWORKS OPERATION
Blade Distance Memory Buttons (A, B, C, D, E)
4
4-5 EGdoc031621 SETWORKS OPERATION

Using the scale, set the maximum distance between the blades (e.g. 250mm (9.842")).

Press and hold

Measure the distance between the blades and make sure the measured distance is the same as
read on the scale. If not,
See Section 5.6
for scale alignment instructions.

Enter the blade distance without any pauses. Confirm by pressing .
4.3 Blade Distance Memory Buttons (A, B, C, D, E)
After turning on, the TBS-01 inscription appears on the display, and the Setworks is ready for operation
within a few seconds or after pressing
.

To set any blade distance, enter this value using the keypad and press . The blades will
automatically move to the preset distance.

You can also change the blade distance manually using .
You can store up to 5 blade distance values using the memory buttons.

To store any blade distance value using one of the memory buttons, press and hold . ”ABC”
will appear on the upper display. Press any memory button (A, B, C, D or E), enter the desired
blade distance value and confirm by pressing . Perform the same procedure for other
memory buttons. Press to exit this function.
SET
REAL SIZE
ENTER
ENTER
ENTER
SET
ABCDE
SAVE
SET
ABCDE