Safety & General Information
Cutting Capacity
1
1-6
HD92doc042701
Safety & General Information
1.6
Cutting Capacity
See Table 1-3.
The log size capacities of the LT30HD and LT40HD sawmills are listed
below.
See Table 1-4.
The production capacity of the LT30HD and LT40HD sawmills is listed
below. Productivity is based on sawing 1" lumber. The low end of the range is based on a
single operator with no support equipment. The high end of the range is based on two
operators with support equipment.
Max.
Diameter
1
1
Maximum log capacity for a basic mill is 4400 lbs. (1996 Kg).
Max.
Length
1
LT30HD
36" (91.5 cm)
2
2
Maximum diameter capacity prior to revision C8 is 32"
16' 8" (5.1 m)
LT40HD
36" (91.5 cm)
2
21' (6.4 m)
LT30HD with Optional 12'
Bed Extension
3
3
Logs over 4400 lbs. must be distributed so that neither the basic mill or ex-
tension is loaded beyond the 4400 lb. maiximum weight rating. Loading
logs heavier than 4400 lbs. (1996 Kg.) on a mill equipped with bed exten-
sion requires auxilliary log handling equipment.
36" (91.5 cm)
2
28' 8" (8.7 m)
LT40HD with Optional
12' Bed Extension
3
36" (91.5 cm)
2
33' (10.1 m)
TABLE 1-3
Model
Production Capacity
LT30HD/40HD 24hp gas engine
2,000 - 3,400 bdft./day
LT30HD/40HD 15hp electric motor
2,000 - 3,400 bdft./day
LT30HD/40HD 20hp diesel engine
2,000 - 3,200 bdft./day
