Wonderfire 850, Инструкция для установщика и владельца

Страница: 4 / 24

1. HANDLING AND UNPACKING
Before continuing any further with the installation of this heater please read the
following:
Important instructions.

The approximate lifting weight (kg) of the heater parts are listed below:
Model Heat engine Fascia Spacer
Bauhaus 7.14 6.21 1.0*
An optional spacer frame kit is obtainable either from your heater supplier or direct
from Wonderfire Premier Sales. The kit is an 75mm deep spacer kit (Kit number
05801T1). This spacer enables the heater to be flat wall fixed.

One person should be sufficient to lift the heater. If for any reason this weight is
considered too heavy then obtain assistance.

When lifting always keep your back straight. Bend your legs and not your back.

Avoid twisting at the waist. It is better to reposition your feet.

Avoid upper body / top heavy bending. Always bend from the knees rather than
the waist. Do not lean forward or sideways whilst handling the heater.

Always grip with the palm of the hand. Do not use the tips of fingers for support.

Always keep the heater as close to the body as possible. This will minimise the
cantilever action.

Use gloves to provide additional grip.

Always use assistance if required.
2. SAFETY
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Always

Always install the heater in accordance with this guide. If in doubt obtain
expert advice.

Always make sure the electrical socket is accessible and located adjacent to,
but not above or behind the heater.

Always disconnect the heater from the electrical supply before carrying out
cleaning or maintenance.
INSTALLER AND OWNER GUIDE
Page 4
©
Baxi Heating U.K. Limited 2010.