background image

4.

I have dark areas in the fuel effect of my heater or the fuel effect is not as

bright as it was when new.

There is a mirror fitted to the rear of the hood / canopy at
the front of the heater and this may need cleaning. Wipe
the mirror with a clean, dry, non abrasive cloth (See
figure 19).

5.

I have a problem that is different to those in the

previous examples 1- 4.

For general advice about your heater, to report faults,
arrange for your heater to be serviced, or for sales and
product information call 0844 8711 554. Callers in the
Republic of Ireland please telephone 0044 844 8711 554.
For spares inquiries

Spare parts are available nationwide via the ‘interpart
stockist network’. For your local stockist consult
Yellow pages under ‘Central Heating’.

When ordering spare parts please have the below information available. This will help
us to deal with your call quicker and avoid you having to make a second call.

Your Post Code.

Type of Heater (Electric or gas).

The fault, problem or request.

Model, Name and serial number (This information can be found on a small label
attached to the lower right of the heater (See figure 20) and should also have been
recorded on the last page of this guide.

9. ENVIRONMENT

Environmental Protection.

Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your local authority or retailer for recycling
advice.

What should I do when I’m ready to dispose of my heater?

Remove the mains cable from the heater. This should be disposed of with
the heater.

INSTALLER AND OWNER GUIDE

Page 19

© 

Baxi Heating U.K. Limited 2010.

Figure 19.

Содержание 850

























Отзывы: