Wonderfire 850, Инструкция для установщика и владельца

Страница: 16 / 24

Fitting the fascia securing magnets.
1.
Supplied in the fascia packaging are four magnets. Place the magnets as in figure
15.
Fitting the fascia.
1.
Remove the fascia from its packaging.
2.
Hold the fascia firmly and locate onto
the magnets.
Fitting the firefront.
1.
Remove the firefront from its packaging.
2.
Locate the firefront in front of the heater
ensuring that it is central.
3.
Position the ash pan cover beneath the
firefront.
7. OPERATING THE HEATER
Never cover the heater or obstruct the opening at the base of the heater, this
could cause overheating and consequent risk of fire.
The appliance can be controlled by the manual control located
behind the ash pan cover on the lower right hand side of the
heater or by using the remote control handset.
The heat settings are quoted using a 240V ~ 50Hz supply.
Remote Control - What do the buttons do?
Pressing the red ‘ON/OFF’ button.
To activate the remote handset it is necessary to press the red
ON/OFF button. The status lamp on the heater will turn red (see
figure 17).
Pressing the ‘LAMP’ button.
This turns the Visualise effect on. The indicator lamp will flash
green for approximately five seconds, after this time the lamp will
no longer be visible (see figure 17).
INSTALLER AND OWNER GUIDE
Page 16
©
Baxi Heating U.K. Limited 2010.
Figure 16.
Figure 15.