5-18 How to Configure the Job Settings
Rev AB
Wolke m600 touch Operator Manual
How to Enable/Disable the Printheads
9
Navigate to
Tools > Setup> Printhead > Enabled.
Select
Yes
to enable the
printhead for printing and
No
to disable the printhead.
How to Configure the Job Settings
The print job (.CIFF file), image and job settings will be configured in
CLARiSOFT
®
.
Size & Resolution
Printheads
When a new file is created in CLARiSOFT
®
, the corresponding number of
print fields is defined by the user. One printhead corresponds to one print
field. The job can be user-defined within this print field (no restrictions in
terms of number of lines, etc.). Only the maximum print heights are
predefined.
One printhead = maximum print height 12.7 mm (0.5”)
Two printheads = maximum print height 25.4 mm (1”)
Three printheads = maximum print height 38.1 mm (1.5”)
Four printheads = maximum print height 50.8 mm (2”)
On selecting the number printheads, the grouping will also be
determined.
Figure 5-24: Printhead ON/OFF
Содержание m600 basic
Страница 1: ...Wolke m600 touch Operator Manual P N WLK462324 01 Revision AB March 2013...
Страница 75: ...Rev AB Password Protection 4 21 Wolke m600 touch Operator Manual Figure 4 22 Password Screen...
Страница 153: ...9 2 Technical Drawings Rev AB Wolke m600 touch Operator Manual Printhead Red Figure 9 2 Printhead Dimensions...
Страница 155: ...9 4 Technical Drawings Rev AB Wolke m600 touch Operator Manual Sensor Figure 9 5 Sensor Dimensions...
