Rev AB
Setting up the Printer 5-7
Wolke m600 touch Operator Manual
3
Select 0 or 180 degrees depending on your requirement and select
OK
.
The screen orientation changes.
4
Touch the
Home
icon to return to the home page.
Setting up the Printer
To set up the printer, do the following tasks:
If the Configuration Wizard does not appear automatically, navigate to
Tools > Setup > Control > System Configuration.
The
System Configuration
dialog box appears.
Follow the instructions provided by the
System Configuration Wizard
and
touch
Next
when ready to progress.
In case of an error, press
Back
to return to the previous screen and correct
the error. Press
Cancel
to exit from the wizard.
Note:
Scroll up and down to see the complete message displayed within a dialog
box.
Language, Region/Country, Date and Time
1
Follow the instructions displayed on the screen to configure the
Language, Region/Country, Date and Time and press
Next
.
Figure 5-8: System Configuration
Содержание m600 basic
Страница 1: ...Wolke m600 touch Operator Manual P N WLK462324 01 Revision AB March 2013...
Страница 75: ...Rev AB Password Protection 4 21 Wolke m600 touch Operator Manual Figure 4 22 Password Screen...
Страница 153: ...9 2 Technical Drawings Rev AB Wolke m600 touch Operator Manual Printhead Red Figure 9 2 Printhead Dimensions...
Страница 155: ...9 4 Technical Drawings Rev AB Wolke m600 touch Operator Manual Sensor Figure 9 5 Sensor Dimensions...
