User’s Manual – PGT
®
130.DT
Part No.: 7100.PGT130.DT
Page 10 / 21
V12/2020
Extended Configuration
Settings for measurement data retrieval and user data synchronization are available here.
It is recommended to use HTTPS instead of HTTP as secure communication for measurement and
user data transfer. You can additionally define a password for the communication.
·
Access password: Password for the connection
·
User-ID check: Access for only persons defined in the user database (no anonymous
access)
·
Delete the user database
·
Upload user data via CSV file. The file must contain the column ID and Name.
Lines with # at the beginning are
ignored.
·
Use Semicolon or Tab-Stop as
Separator and file extension TXT or
CSV. Character coding is UTF-8
·
Download user data as TEXT/CSV
file
Optional beacon
·
Signal light timing
·
Signal light buzzer settings
Sysinfo
·
Display of software versions
·
System time
·
Device's IP and MAC-address
·
Last measurement poll-time
·
Last sync of user data and amount of
records
·
USB device status
External input device on USB2
Instead of using the internal RFID reader you can connect an external input device like barcode
scanner, magnetic stripe reader or keyboard.
In this case you must disable the internal RFID reader in the configuration menu and restart the
device. If a valid external input device is detected during start-up the user identification will be
handled by that device.
Valid input devices are devices which identify themselves on the USB-Bus as Human Interface
Device (HID). Only one HID-Device can be connected at the same time. Use port USB2 for this
because it provides a maximum power of 500mA.
The expiration time for the User-ID is 10 seconds.
