User’s Manual – PGT
®
130.DT
Part No.: 7100.PGT130.DT
Page 5 / 21
V12/2020
Connections
PWR
Power supply
LAN
Ethernet Interface
USB1 / USB2
External component connectors
•
Optional external input device (needs to be connected in USB 2)
•
Temperature/Humidity Sensor
•
Label printer
•
Beacon light
RELAY
Door opener output (Solid State Relay)
Switches if the measurement is within the limit values and a valid user was identified.
Contact between pin 3 and 4.
Contact-less, solid state relay to switch
24V/DC (16V/AC
)
ohmic load
up to
2A
.
Output contact: Pin 3 and 4
Footwear electrode
Cable outlet is configurable to
(middle,
right
and left)
Dimension:
500 x 350 x 9mm (WxLxH)
Electrode:
2 x (300 x 160 mm)
Cable length:
2,5 m
Separator:
optional
Footwear electrode with optional red separator
This output is designed to switch ohmic loads directly.
To switch inductive loads, it is required to protect the relay from over-voltage surge with recovery
diode or RC-combination/ snubber.
Schematic drawing of the relay
