5.1 Hand clutch
The hand clutch is located in front of the handle of the machine.
Engage the motor drive by pushing the clutch forward / down.
By pulling the clutch upwards the Vario-Stripper SILENT stops.
Do not run the machine for a long while (e.g. during a break) with
the motor drive switched on and the clutch disengaged.
After changing the inclination of the handle, it may be necessary
to readjust the handle attachment of the clutch. See also
Chapter 5.4 "Adjusting the handle".
5.2 Setting the speed
To adapt the Vario-Stripper SILENT to different floorings, adjust
the speed. The optimum speed depends on the type of flooring,
the adhesive and the ambient temperature.
Therefore generally valid statements cannot be given.
If the blade jumps on top of the flooring, reduce the speed.
5.3 Setting the angle of the blade
The blade angle can be varied with three different angle
adapters. The stripper is delivered with the 15° angle adapter
mounted. The angles of the two other adapters are 25° and 35°.
Optimum angle of the blade
The optimum angle of the blade depends on the type of flooring,
the adhesive and the subfloor.
Due to the variety of working conditions generally valid state-
ments cannot be given.
If the blade jumps on top of the flooring, set the angle steeper.
Set the angle flat with soft subfloors like particle boards or wood.
Otherwise you might deteriorate the subfloor.
13
03/2006
Vario-Stripper SILENT ,
Artikel-Nr. 038764
Fu
Winkeladapter 15°
Flachrundschraube
mit Vierkantansatz
Sechskantmutter
Ersatzmesser
Blechschwinger
Flachrundschraube
mit Vierkantansatz
Abweiser Blech
Sechskantmutter
Blade holder
Hexagon nut
angle
adapter
Screw
machine truss
Replacement
blade
Hexagon bolt
Striker Foot
Casting
Screw
machine truss
(pic. 3)
(pic. 1)
(pic. 2)