Wolfcraft 6907000, Руководство по эксплуатации, Страница: 148 / 224

TRANSPORT AND STORAGE
NOTICE
When the table is not in use or is folded up, always unplug power tools and exten-
sion cables from the safety switch.
Remove all loose parts from the table. The safety shield, parallel guide and angle
stop can remain mounted on the table during transport or storage. Alternatively,
you can take off the accessories. To store the table, place it on the aluminium pro-
file (Fig. 4.1), with the short side facing upward. Open the four eccentric levers and
remove the four legs (Fig. 4.2). Close the eccentric lever (Fig. 4.3). Store the legs in
the table, at the bottom. There are holes in the legs that can be used to connect
the legs to the retaining lugs on the retaining plates. Then fix the legs in position
with the hook and loop straps (Fig. 4.4).
Trick for the angle stop
Insert at least two of the four workpiece stoppers into the table as
transport protection, then the angle stop does not slip out of the pro-
file (Fig. 4.5).
For transport purposes, you can carry the table either by the long or the short side
(Fig. 4.6).
MAINTENANCE AND CLEANING
– After any work, always clean the machine table using a dry cloth or vacuum
cleaner.
– Do not use aggressive and/or scouring cleaning agents or solvents.
DISASSEMBLY AND DISPOSAL
Always dispose of the packaging materials in an environmentally friendly manner.
In the event of disposing of the product, observe local disposal regulations.
WARRANTY CONDITIONS
Dear DIY enthusiast, you have purchased a high-quality wolfcraft® product which
we know you will enjoy using. wolfcraft® products are built to high technical
standards and undergo intensive development and testing before leaving the fact-
ory. Constant checks and regular tests during their production ensure a high stand-
ard of quality. Sound technical developments and reliable quality assurance give
you the certainty that you have made the right purchase decision. For this wolfcraft
product, we grant you a 10 year warranty from the date of purchase, provided it is
used exclusively for DIY purposes. This warranty only covers damage to the object
of purchase itself and only such damage that is attributable to material or manu-
facturing defects. This warranty does not cover defects or damage attributable to
improper operation or inadequate maintenance of the appliance. Moreover, the
warranty does not include the effects of normal wear, or defects or damage known
to the customer upon conclusion of the purchase contract. Warranty claims can
only be asserted upon submission of the invoice/proof of purchase. The warranty
granted by wolfcraft does not limit your legal rights as a consumer (supplementary
performance, rescission or reduction, compensation for damages or expenses).
Address warranty claims to:
wolfcraft GmbH
Wolffstraße 1
56746 Kempenich
Germany
DECLARATION OF CONFORMITY ACCORDING TO EU
MACHINERY DIRECTIVE 2006/42/EC, APPENDIX II A
wolfcraft GmbH in D-56746 Kempenich, Wolff Str. 1, hereby declares that this
product (MASTER cut 2200) complies with Machinery Directive 2006/42/EC.
In compliance with the following standards:
DIN EN 62841-1, DIN EN 62841-3-1, DIN EN 62841-2-11, DIN EN 61029-2-8
Kempenich, Germany, 25 May 2022
Dr Martin Kraus
Person authorised to sign the declaration of conformity and to compile the tech-
nical documentation (member of the management of wolfcraft GmbH).
8