Wolf BM-2 Скачать руководство пользователя страница 5

Страница: 5 / 44

3064202_201602

Appliance description

1 Appliance description

Intended use

The Wolf BM-2 programming unit is for use exclusively in conjunction with Wolf

heating appliances and Wolf accessories.

The Wolf BM-2 programming unit is used to control the entire heating system and

to set specific heating parameters.

Intended use also includes observing the operating instructions and all other

applicable documents.

Please note:

• The BM-2 programming unit can also be installed as a remote control, which

requires the integration of an AM display module in the heating appliance.

Incorrect use

Any use other than the intended use is not permissible. Any other use or changes

to the product at any time including during fitting and installation invalidate all

warranty claims. The user has sole liability for such use.

This appliance is not designed to be operated by persons (including children)

with restricted physical, sensory or mental capacities or who lack the necessary

experience and/or knowledge, unless they are supervised by a person responsible

for their safety or have received instructions on how to use the appliance from this

person.

14:12

20.01.2013

1.5

bar

25.2

°C

Heating appliance

Heating mode

Pressure

Burner ON

Содержание BM-2













































Результаты поиска

Содержание BM-2

Отзывы:

Похожие инструкции для BM-2

Бренды по названию

Популярные бренды

Wolf BM-2, Инструкция по эксплуатации для пользователя

Результаты поиска

Содержание BM-2

Отзывы:

Похожие инструкции для BM-2

Бренды по названию

Популярные бренды