Wolf Garten HT 40 eM, Руководство пользователя

Страница: 24 / 188

Operation
EN
24
Adjusting the working angle
D
WARNING!
Risk of injuries due to the cutting tool.
¾
Only adjust the device with the motor
switched off and the cutting tool at a
standstill.
¾
Before any work on the device, first
remove the operating arm with the per-
manently installed power pack.
The device can be set in any of seven different
working angles. This allows you to easily reach
problematic and difficult-to-access positions in the
garden .
Î
Press and hold the locating button
1
.
Î
Set the working angle
2
.
Î
Release the locating button.
3
The hedge trimmer locating button engages
audibly.
Connect the hedge trimmer to the operating
arm
A
Î
Press the locking button [A] on the operating arm
and insert the operating arm into the locator on
the hedge trimmer until the locating button [B]
engages
12
.
Attention!
¾
Ensure the button is correctly engaged
Note
A middle handle is available as an optional
accessory for the operating arm. You can
find more information and assembly
instructions in the operating manual for the
operating arm.
Operation
Operating times
Please observe the times stipulated in local
byelaws.
Check with your local authorities to determine if
there are any operating time limitations.
Switching the device on
B
WARNING!
Risk of injuries or material damage
¾
Hold the hedge trimmer in the working
position as shown in figure
C
.
¾
During operation, always hold on to the
device with both hands. One hand holds
the handle, the other hand holds the
operating arm in the encased area or the
optionally available middle handle.
¾
Always ensure you are standing safely.
Î
Remove the protective cover.
Î
Press the lock-on switch [A] on the handle
1
.
Î
Simultaneously press the on/off switch [B] on the
handle
2
.
Î
Release the lock-on switch.
3
The device operates.
Switching the device off
B
Î
Release the on/off switch on the handle.
3
The device is switched off.
Note
The cutting tool continues to run for a brief
period after being switched off.
Note
The lock-on switch automatically returns to
its initial position when you release the on/
off switch.
Cutting
F G
Cutting tips
- Please remember the breeding season of birds!
- The ideal shape for hedge cutting is trapezoidal,
which allows enough light and air to reach all parts
of the hedge.
- To promote thick growth in young hedges new
shoots should only be shortened by half.
- If the hedge has already reached your desired
height, now shoots can be completely removed.
- To obtain a uniform hedge height, you can tension
a guide line at the desired height and then cut
along this line.
Cutting times
Deciduous
hedges
May/June and October (per-
form pruning by about 1/3 of
the total height in winter)
Evergreen hedg-
es
April and October
Conifers April and October