Wolf cinema REF-1000 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 115

background image

36

NOTES: 1) You can still adjust a direct slide bar as usual if the display is turned off (see OSD or Menu Preferences
menu) — the slide bar just won’t be visible. 2) A direct slide bar disappears if it is not used within five seconds.

Check boxes

‐ Conditions are present if its adjacent check box

contains a checkmark. To toggle the check box, highlight and
press ENTER, or highlight and use RIGHT ARROW KEY to check
and LEFT ARROW KEY to uncheck. If a check box is numbered, enter its number to immediately toggle the check
box. Pull‐down lists – To see a pull‐down list of options available for a given parameter:

•

Highlight the list and press ENTER; or

•

Enter the menu option number

Use the UP ARROW KEY or DOWN ARROW KEY to navigate up and down within the list. Press ENTER to choose an
option from the list.

If you prefer to quickly scroll through a list without first pulling it down, highlight the option and use LEFT ARROW

KEY or RIGHT ARROW KEY. Press ENTER when the desired choice appears. NOTES: 1) Press LEFT ARROW KEY or
RIGHT ARROW KEY to jump between pages in an extra long pull‐down list. 2) Press EXIT while in a pull‐down list to
cancel any change.

Editing Text

Activate the Edit Window: To enter or edit text, highlight the desired
parameter (such as a channel name) and press ENTER to activate its
adjacent edit window. Any previously entered text is displayed with its
first character highlighted in a square cursor, signifying that this
character is ready for editing.

Navigate Within the Edit Window: Press RIGHT ARROW KEY to move the cursor forward or LEFT ARROW KEY to
move the cursor backwards as desired.

Edit a character:

To edit a highlighted character, use UP ARROW KEY and DOWN ARROW KEY to scroll through the

alphabet, numbers, spaces and punctuation available. When the character you need appears, press RIGHT ARROW
KEY to select it—the cursor will move to the next available character of current text. To convert a lower case letter
into a capital letter, position the cursor on the letter and press FUNC followed by the UP ARROW KEY. To convert a

«
...
34
35
36
37
38
...
»

Содержание REF-1000




















































































































Отзывы:

Нет отзывов

Похожие инструкции для REF-1000

Бренд: 3M Страницы: 9

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 124

Бренд: Panasonic Страницы: 66

Бренд: Panasonic Страницы: 10

Бренд: Panasonic Страницы: 144

Бренд: Panasonic Страницы: 30

Бренд: Panasonic Страницы: 6

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 72

Бренд: Radiola Страницы: 51

Бренд: Maxell Страницы: 22

Бренд: RS Страницы: 4

Бренд: Minolta Страницы: 42

Бренд: ViewSonic Страницы: 43

Бренд: Dukane Страницы: 24

Бренд: Barco Страницы: 14

Бренд: Navitar Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды