821688: RMT-170-HD User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
4
RMT-170-HD User Guide
Compliance
C.
Alternate Mounting Option: Alternate mountings can be
accommodated by the VESA-100 mounting plate (hardware
not supplied by Wohler).
3.
Place the RMT-170-HD in the required location for operation.
4.
Connect the required signals. For BNC connections use 75
-rated
connectors.
5.
Connect the DC adapter plug to the back of the monitor and the other
end to power.
6.
Finally, press the power (toggle) switch located on the rear of the RMT-
170-HD above the power connection.
Compliance
FCC
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
IC-ECES-003
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
