821688: RMT-170-HD User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
17
RMT-170-HD User Guide
Rear Panel Connectors
•
SDI Inputs 1 and 2
: HD/SD-SDI input signal on BNC jacks.
•
SDI Output
: Output jack for selected SDI signal.
•
Line 1 (Video)
: Input jack for analog composite video signal only.
•
LINE2 (Video/Y)
: Input jack for analog composite video input
signal, or luminance (Y) signal of Y/C or YPrPb.
•
Line 2 (C/Pb)
: Input jack for Chroma (C) signal of Y/C or Pb (Blue)
component of YPrPb.
•
Line 2 (Pr)
: Input jack for Pr (Red) component of YPrPb.
•
Config I/O
(on DB-9): Remote connector for factory programming
and configuration access.
Figure 1–6
DB-9 Connector Pin-Out
•
DVI-I
(DVI-D/VGA/HDMI): Input jack for DVI analog/digital
and requires an adapter for VGA or HDMI input signal.
•
RS485 I/O (RJ45)
: Connector for external control.
Figure 1–7
RS485 RJ45 Connector Pin Map
Note:
The DVI-I signal type must be set in the
USER CONFIG
menu of the
OSD Menu
to function correctly.
