Wohler iVAM1-12G, Руководство пользователя, Страница: 20 / 125

iVAM1-12G
Page 20
Center, LFE, Left Surround, Right Surround, Back Surround Left,
Back Surround Right, Mono Surround. The selected assignment will
appear at the top of the screen: This assignment
only affects the internal speakers and no other outputs.
Note:
In Solo mode, the
Source/Preset
knob cannot be used to
change the source. The changes made to the channel gains and/or
speaker assignments are temporary and revert to the original values
when a
Source Select
or
Preset Recall
operation is performed.
6.
Phase Indicators
: At the bottom of each channel pair is a Phase
Indicator. The indicators light a dull green if the channels in the pair are
in phase or bright red if they are out of phase. Set which Phase Indicators
appear using the
Phase Config Menu or with the System Preferences:
Phase Indicator Configuration
tab in the Wohler Web GUI.
Video Screen
Information about the signal can be superimposed over the upper part of the video
image. The
Video Info
selection in the
Unit Config Menu
determines whether this
information is always displayed, never displayed, or is only displayed for the first 5
or 10 seconds after switching to the video screen. Figure 2-9 shows the Video
Screen.
Figure 2-9: Video Screen
1.
Video Source
: This box displays the input source of the video signal.
2.
Video Signal
: This box displays the resolution and frame rate of the
video signal. A large variety of signals are detected, including HDR.
Note
: If the
Video Source
and
Video Signal
displays have been optioned
to disappear after 5 or 10 seconds and you wish them to reappear, simply
touch the video screen.