Wohler iVAM1-12G Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 125

Wohler iVAM1-12G Скачать руководство пользователя страница 19

iVAM1-12G

Page 19

3.

Loudness Reading

: This control displays the Loudness of the selected

Cluster. It can also be touched to change which Cluster is being
measured. To do this, touch the green

Loudness Reading

control. It will

temporarily turn orange. You may then touch the meters in any other
cluster. The

Loudness Cluster Marker

will then move to that cluster and

its measurement will begin and be displayed. You may then touch the
control again to return it to its green color, restoring normal touch
functioning, or wait 15 seconds for it to time out.

4.

Channel/Cluster/Loudness Selection Area

: Touching the meters of

any channel pair will let you mute, un-mute, or solo the associated
channel(s). Colored boxes surrounding the channel pair or channel
indicate what operation is being performed. The following describes each
function:

a.

Mute / Un-Mute Selection

:

A violet box surrounds any channel

pair that is muted. Typically, when the iVAM1-12G is first powered,
all of the channel pairs are muted. Touching a muted channel pair
un-mutes it and removes the violet box. Muting and un-muting by
touching is an alternate action function.

b.

Solo Selector

:

Touch for two seconds any channel pair you would

like to solo. A blue box will then surround the pair and that will be
the only pair you hear. Any violet boxes will disappear. Touching
another channel pair will then move the blue box to it, and it will be
soloed. Touch again to return the combination of monitored channel
pairs to the way they were before you soloed the pair.

c.

Channel Solo

: Rotating the

Channel

control will move a white

selection box from channel to channel. Press the

Channel

control

to solo the selected channel. That channel alone will then be
surrounded by a blue box and it will become the only channel being
monitored. Press the

Channel

control again or touch anywhere on

the meters to undo the solo and return the combination of
monitored channel pairs to as it was before you soloed the channel.

5.

Channel Gain and Speaker Assignment:

The channel gain and speaker

assignment of a particular channel can be changed dynamically from the
Front Panel controls. When a channel is soloed (as in the

Solo Selector

paragraph above) the

Source/Preset

knob can be used to perform the

following operations:

a.

Adjust Channel Gain:

The user can rotate the

Source/Preset

knob to adjust the channel gain for the soloed channel. This affects
the input channel gain. Valid range is from -60 to 12 dB. The

selected gain will display at the top of the screen:

Changing channel gain affects all the outputs that have “Volume
Control” enabled.

b.

Channel Assignment Change:

Press the

Source/Preset

knob

once to toggle to

Channel Assignment Change

mode. In this

mode, rotating the

Source/Preset

knob changes the speaker that

the channel is assigned to. The valid assignments are: Left, Right,

«
...
17
18
19
20
21
...
»

Содержание iVAM1-12G






























































































































Отзывы:

Нет отзывов