Page
6
CHAPTER 1: Installation
Introduction
Overview
The iVAM1-1 is a 1RU multichannel multi-source audio/video monitor with basic 3G-
SDI and analog inputs. It may also be purchased with a large variety of other
inputs or these may be added later at the need arises. Refer to the Specifications
section of this manual or contact Wohler Sales for more information.
The iVAM1-1 is compact and simple to operate, with straightforward controls. It has
a touch screen LCD display providing either video or high resolution level meters,
and in addition has an HDMI output. Any channels (or channel pairs) from any
audio/video source stream may be monitored. Either 8 or 16 channel meters can be
displayed.
The iVAM1-1 includes two 3G SDI inputs and it can monitor both video and audio
from them. Optional modules will allow decoding of an additional SDI input, MADI,
AES3, TOSLINK, SMPTE 2110, and SMPTE 2022-6 streams. It contains APIs for
remote management.
Setups are created and configured using local menus and a web browser over a
network connection to the integral web server of the iVAM1-1. The web server will
also allow you to view the audio meters remotely.
Safety
Instructions
1.
Read, keep, and follow all of these instructions; heed all warnings.
2.
Do not use this equipment near water.
3.
Use only a dry cloth to clean the equipment.
4.
Do not block any ventilation openings.
5.
Do not install near any heat source such as a radiator, heat register, amplifier, or
stove.
6.
Do not attempt to plug the unit into a two-blade outlet (with only two prongs of
equal width).
7.
Protect the power cord from being walked on or pinched, particularly at plug
connection on the equipment and at the socket.
8.
Use only the attachments/accessories specified by the manufacturer.
9.
Unplug the equipment during lightning storms or when unused for long periods
Important:
By design, the supplied AC mains power cord will only plug into a
three-prong grounded outlet for your safety. If the plug does not fit
into the outlet, contact an electrician to replace the obsolete outlet.
