Page
50
Factory Reset
The
Factory Reset
function should be used with caution. It deletes all of the
settings you have programmed into the system. It returns the system to the way it
was when received new from the factory. After using this function, you will need to
reprogram everything from the start.
Figure 4–8: Factory Reset
If you have any doubt as to whether you should perform a Factory Reset,
do not
click the
Initiate Factory Reset
button. Contact Wohler Technical Service for
advice.
Note:
Factory Reset
will also reset your IP address to the default one. After a
Factory Reset, the IP Settings will need to be updated. The default IP address for
the unit is determined based upon the Mac address. It is 169.254.1.xx where xx is
the last octet of the management Mac address. For example, if the Mac address is
b4:ed:54:d0:04:28 then the IP address would be 169.254.1.40 (40 is the decimal
equivalent for the last octet of Mac address 28.)
